Lode Angio CPET with Automatic Stand

Request Quote

Lode Angio CPET with Automatic Stand

Modern ergometer with multifunctional applications

The Lode Angio CPET with automatic stand is an ergometer that can be used for both arm and supine ergometry. Its compact design makes it universally applicable for many studies in those sectors where standard cycle ergometry cannot be used. The Lode Angio CPET with automatic stand allows for a range 140cm movement up and down. For heavy use during arm-ergometry it is possible to fixate the stand to the wall with the supplied parts.

The Lode Angio CPET with automatic stand is standard supplied with hand grips.

Clear Screen

Important parameters such as, workload, rpm and time can be readout from the 3,5″ colour display.

Connect your Ergometer

The Lode Angio CPET with automatic stand is supplied as standard with a communication module, allowing for easy control of all known stress ECG and pulmonary devices.

A USB A-B cable for service purposes as well as connecting to ECG and pulmonary testing devices will be standard delivered with the product. To connect older ECG and pulmonary testing devices with RS232 or other connectors you need a special interface cable that can be ordered separately.


What makes a Lode Ergometer?

The eddy current electro-magnetic braking mechanism is synonymous to all Lode Ergometers. Eddy current braking systems offer quiet, smooth, precise and adjustable control. Through design, this allows control of the workload without the need for physical contact between brake pads and the flywheel, reducing wear and tear.

High standards

Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2003, ISO 13485:2008 and FDA 510K certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.

Multifunctional, reliable ergometer for various applications

The Lode Angio with automatic stand workload is adjustable in 1 watt increments and in the range of 7 to 1000 watts. This offers a wide working range for test subjects of all strengths and abilities. The communication module built into the Lode Angio automatic stand will easily connect with our range of Cortex Metabolic devices or ECG devices.


Workload below 100w – Accurate within 3W

Workload between 100w – 500w – Accurate within 3%

Workload between 500w – 1000w – Accurate within 5%

Easy to Clean

All surfaces on the Lode Angio CPET with automatic stand are easily wipeable thanks to their gloss finish. Use a lightly moistened cloth with a non-abrasive, soap or disinfectant. Cleaning agents containing alcohol or caustic components may damage and/or discolour surfaces.

Hidden Connectors

All cables and connections are underneath the ergometer, reducing the risk of wires accidentally being knocked or pulled out and give a cleaner look.

Calibration & Maintenance

The ergometer should be calibrated and serviced once per year. Our team of experienced engineers, use our dedicated Lode calibrator to check the ergometers power output at a variety of power increments and cadences. Giving you peace of mind that the ergometer is fully functional and as accurate as the day it left the factory.

Further Options include:

7″ Touchscreen Control Unit

The 7″ Colour Touchscreen is available in two models, Standard and Programmable. Both models of 7″ touchscreen further enhance the capability of the Lode Angio CPET with automatic stand by allowing the ergometer to be used as a standalone piece of equipment in manual mode.

In manual mode, the Lode Angio CPET with automatic stand can be used in Hyperbolic (rpm independent), Linear (rpm dependent) and Fixed Torque (rpm dependent) modes. In addition there is also an option for Manual with Target, which allows for manual control set by time, distance or energy target – if purchased, this can also be controlled via Heart Rate (HR). By where a desired HR range is set and the ergometer will control the power output, to keep the test subject within the defined HR range.

Add Programmer features to 7″ Touchscreen Control Unit

The program function enables testing and training on Lode devices with a controlled change in workload during exercise. Protocols manage the load during exercise in steps, ramps or even a heart rate controlled function without having to change this manually. Defining the protocols beforehand not only provides a controlled workload but also gives room to focus on the test subjects during exercise. Up to 50 protocols can be programmed.

Heart Rate

This option gives the heart rate in beats per minute on the touchscreen display and offers the possibility of heart rate controlled testing. The test person wears a belt with a sensor. NB this can only be ordered in combination with the (Programmable) 7″ touchscreen.

Adjustable Cranks

Adjustability of the cranks allows for optimal force application of different limb lengths and helps tailor the ergonomics of the ergometer to best fit the test subject. The cranks are adjustable in the range of 80 – 180 mm, in steps of 5 mm. This option will be supplied instead of the standard cranks.


This option gives the SpO2 on the display of the control unit of ergometers and can only be ordered in combination with the (Programmable) 7″ touchscreen.

Electric adjustable chair for arm ergometer

Add extra comfort seating position in front of the ergometer with the adjustable reclining chair to be placed in front of the Lode Angio CPET with automatic stand. The back support of the chair is adjustable in the range of 85° – 145°. The horizontal position of the chair can be adjusted by 600mm.

Extra wide access for wheelchairs

The Extra wide access to the Lode Angio CPET with automatic stand increases the width from 67cm to 150 cm, for easy access of wheelchairs.

Note: this option in not compatible with the electric adjustable chair (#917813)



Product length (cm) 84 cm
Product width (cm) 82 cm
Product height 223 cm
Product weight 95 kg
Width between stand 67 cm

Do you have any questions about Lode Angio CPET with Automatic Stand?

    You may also like…