Lode Corival Recumbent CPET
Lode Corival Recumbent CPET – Reliable Cycle Ergometry
The Lode Corival Recumbent CPET is a special product from our Corival line. The Lode Corival is one of the most popular ergometers worldwide, with a proven track record of accuracy, quiet operation and low start-up load of 7 Watts, it isn’t hard to see why.
The latest design of the Lode Corival Recumbent CPET ergometer offers ergometry testing for test subjects up to 300 kg! Easy positioning and access is guaranteed with the electrically adjusted seat and adjustable handgrips, next to the seat. The back support is fully adjustable too and can be positioned completely flat.
With it’s 512mm wide seat and high user capacity, this ergometer can be used for patients of all demographics for Stress Testing or Training purposes.
Important parameters such as, workload, rpm and time can be readout from the 3.5″ colour display.
Connect your Ergometer
The Lode Corival Recumbent CPET is supplied as standard with a communication module, allowing for easy control of all known stress ECG and pulmonary devices.
A USB A-B cable for service purposes as well as connecting to ECG and pulmonary testing devices will be standard delivered with the product. To connect older ECG and pulmonary testing devices with RS232 or other connectors you need a special interface cable that can be ordered separately.
What makes a Lode Ergometer?
The eddy current electro-magnetic braking mechanism is synonymous to all Lode Ergometers. Eddy current braking systems offer quiet, smooth, precise and adjustable control. Through design, this allows control of the workload without the need for physical contact between brake pads and the flywheel, reducing wear and tear.
Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2003, ISO 13485:2008 and FDA 510K certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.
Perfect for Stress Testing all patients
The Lode Corival Recumbent CPET workload is adjustable in 1 watt increments and in the range of 7 to 1000 watts. This offers a wide working range for test subjects of all strengths and abilities. The communication module built into the Lode Corival Recumbent CPET will easily connect with our range of Cortex Metabolic devices or ECG devices.
The ultralow step-through enables easy access to the ergometer and combined with the electrically adjusted saddle, the patient can be easily positioned.
Maximum user weight – 300 kg
Workload below 100w – Accurate within 3W
Workload between 100w – 500w – Accurate within 3%
Workload between 500w – 1000w – Accurate within 5%
Easy to Clean
All surfaces on the Lode Corival Recumbent CPET are easily wipeable thanks to their gloss finish. Use a lightly moistened cloth with a non-abrasive, soap or disinfectant. Cleaning agents containing alcohol or caustic components may damage and/or discolour surfaces.
Calibration & Maintenance
The ergometer should be calibrated and serviced once per year. Our team of experienced engineers, use our dedicated Lode calibrator to check the ergometers power output at a variety of power increments and cadences. Giving you peace of mind that the ergometer is fully functional and as accurate as the day it left the factory.
Further Options include:
7″ Touchscreen Control Unit
The 7″ Colour Touchscreen is available in two models, Standard and Programmable. Both models of 7″ touchscreen further enhance the capability of the Lode Corival Recumbent CPET by allowing the ergometer to be used as a standalone piece of equipment in manual mode.
In manual mode, the Lode Corival Recumbent CPET can be used in Hyperbolic (rpm independent), Linear (rpm dependent) and Fixed Torque (rpm dependent) modes. In addition there is also an option for Manual with Target, which allows for manual control set by time, distance or energy target – if purchased, this can also be controlled via Heart Rate (HR). By where a desired HR range is set and the ergometer will control the power output, to keep the test subject within the defined HR range.
Add Programmer features to 7″ Touchscreen Control Unit
The program function enables testing and training on Lode devices with a controlled change in workload during exercise. Protocols manage the load during exercise in steps, ramps or even a heart rate controlled function without having to change this manually. Defining the protocols beforehand not only provides a controlled workload but also gives room to focus on the test subjects during exercise. Up to 50 protocols can be programmed.
This option gives the heart rate in beats per minute on the touchscreen display and offers the possibility of heart rate controlled testing. The test person wears a belt with a sensor. NB this can only be ordered in combination with the (Programmable) 7″ touchscreen.
The blood pressure monitor is designed for blood pressure measurements during physical activity. Thanks to mechanical and electrical filtering, the BP readings remain reliable even during high load exercise tests. For both stress and resting BP reading, the original auscultatory Korotkov / Riva-Rocci method is used.
Thanks to a built-in speaker, original Korotkoff sounds are clearly reproduced. An ECG trigger is not needed for reliable BP readings, although it is available if desired. Measurement time is very short (usually within 30 seconds) thanks to the rapid cuff inflation.
The blood pressure monitor can be used in 2 ways: Fully integrated control by all common ECG or CPET devices or as a stand alone device with automatic interval measurements.
Various Cuff sizes are available. The cuff is completely washable, thanks to the removeable microphone and inflation bag.
The zero-watt startup option (purchased additionally) allows to you to start the ergometer without load at a preset pedal speed (between 30 – 60 rpm). With this option there is no energy-loss for the Test Subject due to the start-up phase. This is done via an electric motor and can only be used in conjunction with a 7″ touchscreen. It is not possible to combine the zero watt option with the electric saddle adjustment.
Adjustability of the cranks allows for optimal force application of different limb lengths and helps tailor the ergonomics of the ergometer to best fit the test subject. The cranks are adjustable in the range of 80 – 180 mm, in steps of 5 mm. This option will be supplied instead of the standard cranks.
This option gives the SpO2 on the display of the control unit of ergometers and can only be ordered in combination with the (Programmable) 7″ touchscreen.
|320 x 240 pixels