Lode Angio CPET – Static Wall Fixation

Request Quote

Lode Angio CPET – Static Wall Fixation

Modern ergometer with multifunctional applications

The Lode Angio CPET with Static Wall Fixation is an ergometer that can be used for both arm and supine ergometry. Its compact design makes it universally applicable for many studies in those sectors where standard cycle ergometry cannot be used. The Lode Angio CPET with Static Wall Fixation allows for a range 70cm movement up and down.

The Lode Angio CPET with Static Wall Fixation is standard supplied with hand grips.

Clear Screen

Important parameters such as, workload, rpm and time can be readout from the 3,5″ colour display.

Connect your Ergometer

The Lode Angio CPET with Static Wall Fixation is supplied as standard with a communication module, allowing for easy control of all known stress ECG and pulmonary devices.

A USB A-B cable for service purposes as well as connecting to ECG and pulmonary testing devices will be standard delivered with the product. To connect older ECG and pulmonary testing devices with RS232 or other connectors you need a special interface cable that can be ordered separately.

What makes a Lode Ergometer?

The eddy current electro-magnetic braking mechanism is synonymous to all Lode Ergometers. Eddy current braking systems offer quiet, smooth, precise and adjustable control. Through design, this allows control of the workload without the need for physical contact between brake pads and the flywheel, reducing wear and tear.

High Standards

Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2003, ISO 13485:2008 and FDA 510K certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.

Multifunctional, reliable ergometer for various applications

The Lode Angio with Static Wall Fixation workload is adjustable in 1 watt increments and in the range of 7 to 1000 watts. This offers a wide working range for test subjects of all strengths and abilities. The communication module built into the Lode Angio with Static Wall Fixation will easily connect with our range of Cortex Metabolic devices or ECG devices.


Workload below 100w – Accurate within 3W

Workload between 100w – 500w – Accurate within 3%

Workload between 500w – 1000w – Accurate within 5%

Easy to Clean

All surfaces on the Lode Angio CPET with Static Wall Fixation are easily wipeable thanks to their gloss finish. Use a lightly moistened cloth with a non-abrasive, soap or disinfectant. Cleaning agents containing alcohol or caustic components may damage and/or discolour surfaces.

Hidden Connectors

All cables and connections are underneath the ergometer, reducing the risk of wires accidentally being knocked or pulled out and give a cleaner look.

Calibration & Maintenance

The ergometer should be calibrated and serviced once per year. Our team of experienced engineers, use our dedicated Lode calibrator to check the ergometers power output at a variety of power increments and cadences. Giving you peace of mind that the ergometer is fully functional and as accurate as the day it left the factory.

Further Options include:

7″ Touchscreen Control Unit

The 7″ Colour Touchscreen is available in two models, Standard and Programmable. Both models of 7″ touchscreen further enhance the capability of the Lode Angio CPET with Static Wall Fixation by allowing the ergometer to be used as a standalone piece of equipment in manual mode.

In manual mode, the Lode Angio CPET with Static Wall Fixation can be used in Hyperbolic (rpm independent), Linear (rpm dependent) and Fixed Torque (rpm dependent) modes. In addition there is also an option for Manual with Target, which allows for manual control set by time, distance or energy target – if purchased, this can also be controlled via Heart Rate (HR). By where a desired HR range is set and the ergometer will control the power output, to keep the test subject within the defined HR range.

Add Programmer features to 7″ Touchscreen Control Unit

The program function enables testing and training on Lode devices with a controlled change in workload during exercise. Protocols manage the load during exercise in steps, ramps or even a heart rate controlled function without having to change this manually. Defining the protocols beforehand not only provides a controlled workload but also gives room to focus on the test subjects during exercise. Up to 50 protocols can be programmed.

Heart Rate

This option gives the heart rate in beats per minute on the touchscreen display and offers the possibility of heart rate controlled testing. The test person wears a belt with a sensor. NB this can only be ordered in combination with the (Programmable) 7″ touchscreen.

Adjustable Cranks

Adjustability of the cranks allows for optimal force application of different limb lengths and helps tailor the ergonomics of the ergometer to best fit the test subject. The cranks are adjustable in the range of 80 – 180 mm, in steps of 5 mm. This option will be supplied instead of the standard cranks.


This option gives the SpO2 on the display of the control unit of ergometers and can only be ordered in combination with the (Programmable) 7″ touchscreen.

Pedal Shoes (Pair) – Standard/Paediatric/ Extra Large

A pair of pedal shoes with double strap for foot fixation, to enable reclined pedalling. These pedal shoes are different to the single strap pedal available for all Lode ergometers. Available in 3 sizes:

XL – UK Shoe size (8-13) EU Shoe Size (42-48)

Standard – UK Shoe size (1-7.5) EU Shoe size (32-41)

Paediatric – UK Children’s Shoe size (6.5-12) EU Shoe size (24-31)




Product length 54 cm
Product width  68 cm
Product height 73 cm
Product weight 55 kg

Do you have any questions about Lode Angio CPET - Static Wall Fixation?

    You may also like…