Lode Corival Rehab
Lode Corival Rehab – Reliable Cycle Ergometry
The Lode Corival is one of the most popular ergometers worldwide. With it’s Ultra-low step through design, quiet operation and low start-up load of 7 Watts, it isn’t hard to see why.
Save time with easy ergonomics
The new designed lever for the Lode Corival Rehab makes it even easier to adjust the handlebar, rotating 360 degrees to find the optimum handlebar position at any saddle height. Adjusting the saddle can be done with one hand using a small lever or via the display when purchased with the electric saddle option.
The Corival Rehab is standard supplied with a 7″ touchscreen control unit, allowing you to read out important parameters such as, workload, rpm and time.
Perfect fit for a rehab setting
With its easy ergonomics and simple adjustment, the Lode Corival Rehab makes working with patients easy. The large 7″ touchscreen control unit is easy and intuitive to use, allows for manual control of the ergometer modes and workload.
What makes a Lode Ergometer?
The eddy current electro-magnetic braking mechanism is synonymous to all Lode Ergometers. Eddy current braking systems offer quiet, smooth, precise and adjustable control. Through design, this allows control of the workload without the need for physical contact between brake pads and the flywheel, reducing wear and tear.
Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2003, ISO 13485:2008 and FDA 510K certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.
Perfect for Rehab setting
The Lode Corival Rehab workload is adjustable in 1 watt increments and in the range of 7 to 1000 watts. This offers a wide working range for test subjects of all strengths and abilities. The built in network module allows the Lode Corival Rehab to be connected to the Lode Cardiac Rehab Manager Software, Lode Rehab Manager or the Lode Ergometry Manager. These software platforms are optimised for the environment they serve, maximising the effectiveness of the patient session.
The ultralow step-through enables easy access to the ergometer and combined with the easily adjusted handlebar it guarantees a perfect ergonomic position. The saddle height can be read out via the scale on the saddle shaft or digitally, via the optional 7″ touchscreen control unit if purchased with the electric saddle option.
The Lode Corival Rehab has a maximum user weight of 180 kg.
Workload below 100w – Accurate within 3W
Workload between 100w – 500w – Accurate within 3%
Workload between 500w – 1000w – Accurate within 5%
Easy to clean
All surfaces on the Lode Corival Rehab are easily wipeable thanks to their gloss finish. Use a lightly moistened cloth with a non-abrasive, soap or disinfectant. Cleaning agents containing alcohol or caustic components may damage and/or discolour surfaces.
All cables and connections are underneath the ergometer, reducing the risk of wires accidentally being knocked or pulled out and give a cleaner look.
Calibration & Maintenance
The ergometer should be calibrated and serviced once per year. Our team of experienced engineers, use our dedicated Lode calibrator to check the ergometers power output at a variety of power increments and cadences. Giving you peace of mind that the ergometer is fully functional and as accurate as the day it left the factory.
Further Options include:
Add Programmer features to 7″ Touchscreen Control Unit
The program function enables testing and training on Lode devices with a controlled change in workload during exercise. Protocols manage the load during exercise in steps, ramps or even a heart rate controlled function without having to change this manually. Defining the protocols beforehand not only provides a controlled workload but also gives room to focus on the test subjects during exercise. Up to 50 protocols can be programmed.
This option gives the heart rate in beats per minute on the touchscreen display and offers the possibility of heart rate controlled testing. The test person wears a belt with a sensor. NB this can only be ordered in combination with the (Programmable) 7″ touchscreen control unit.
Electric adjustable saddle
With this option, the saddle of the Lode Corival Rehab can be adjusted in a range of 30 cm using the 7″ touchscreen control unit. The patient can be seated on the saddle while adjusting the height. The saddle height can also be adjusted with the Lode Ergometry Manager (LEM) or Lode Cardiac Rehab Manager (LCRM) software if you have these.
NB: this option cannot be combined with the:
– optional shortened saddle shaft
– optional 0-Watt start-up system
The blood pressure monitor is designed for blood pressure measurements during physical activity. Thanks to mechanical and electrical filtering, the BP readings remain reliable even during high load exercise tests. For both stress and resting BP reading, the original auscultatory Korotkov / Riva-Rocci method is used.
Thanks to a built-in speaker, original Korotkoff sounds are clearly reproduced. An ECG trigger is not needed for reliable BP readings, although it is available if desired. Measurement time is very short (usually within 30 seconds) thanks to the rapid cuff inflation.
The blood pressure monitor can be used in 2 ways: Fully integrated control by all common ECG or CPET devices or as a stand alone device with automatic interval measurements.
Various Cuff sizes are available. The cuff is completely washable, thanks to the removeable microphone and inflation bag.
The zero-watt startup option (purchased additionally) allows to you to start the ergometer without load at a preset pedal speed (between 30 – 60 rpm). With this option there is no energy-loss for the Test Subject due to the start-up phase. This is done via an electric motor and can only be used in conjunction with a 7″ touchscreen. It is not possible to combine the zero watt option with the electric saddle adjustment.
Adjustability of the cranks allows for optimal force application of different limb lengths and helps tailor the ergonomics of the ergometer to best fit the test subject. The cranks are adjustable in the range of 80 – 180 mm, in steps of 5 mm. This option will be supplied instead of the standard cranks.
This option gives the SpO2 on the display of the control unit of ergometers and can only be ordered in combination with the (Programmable) 7″ touchscreen.
Shortened Saddle Shaft
With the shortened saddle shaft option the saddle of the ergometer can be adjusted to the lowest position possible. The saddle is adjustable in a range of 452 – 775 mm. The minimum leg length (with standard pedals) is 622 mm and with adjustable cranks 532 mm. The minimum saddle height is 452 mm.
NB: this option cannot be combined with the electric adjustable saddle height
The transportation wheel that can be mounted under the Corival in order to easily move your ergometer.